Guide To Select The Best Cold Storage Room Manufacturers

Industrial Cold Room

Buying an industrial cold storage room means a lot of investment. Therefore, you will need to make sure that you end up buying the right refrigeration system from the best cold storage room manufacturers according to your need so as to make sure that your investment is high yielding. 

When it comes to selecting a cold storage room, there are ideally three specific types of it to consider. These are: 

Traditional Cold Storage Room: 

In this system, the walls are constructed. This results in better insulation and reduces heat transfer. However, you will need to install a separate vapor barrier in this arrangement in order to protect the insulation. You will usually find such a system installed in old establishments such as an old butcher shop. 

Modular and detachable cold storage room: 

• This type of cold storage rooms come with several prefabricated units that include:
• The walls
• The modular insulation panels
• The floors
• The ceilings
• The doors
• The cabinets and several other accessories with it. 

The primary advantage of this cold storage model is that you can remove it and re-assemble depending on the situations. There are consoles on the panels that support the cooling battery or evaporator that helps in proper installation. The compressor, condenser and the expansion valve are placed in a separate service room. 

Prefabricated Non-Detachable Cold Storage Room: 

Cold Room Storage

This is a special range of cold storage rooms produced by a few cold storage room manufacturers that have one wall that is made up of prefabricated panels. You assemble this on site. However, these panels are permanent and cannot be dismantled once installed. .

In order to select the best system and cold storage room manufacturers, consider: 

• The volume of the room
• The thickness of the sandwich panels
• The operating temperature
• Thermograph
• The power of the refrigeration unit as well as the
• Complexity in the installation process. 

Of course, price should be on your list of factors but that should come in the end. 

Choosing Prefabricated Chambers 

If you choose a prefabricated chamber you will get a ready heat-insulating sandwich panel. 

•  It typically comes with polyurethane filler that has special fastening at the junctures.
• In addition to that, you can easily demount and reinstall it in a new location. 

To make the right choice you must consider the volume and dimensions you need because it may vary according to the cold storage room manufacturers production policies. 

Ideally, there are two specific categories in which these prefabricated chambers are divided into. It differs in the connection types. These are: 

• Profile plastic chambers that come with dovetail fastening or spike groove joints and
• Lock chambers comprising on an eccentric lock built into the sandwich panel. 

Both of these have rigidly fixed coupling that may withstand many assembly and disassembly. 

• Chambers having spike groove joints are often cheaper but you will need to use a sealant at the joints to ensure proper insulation. 

• The plastic fastening, on the other hand, is less rigid and therefore does not come in more than 2 to 3 m in length or width. 

Reconstruction of the premise, whether it is a room or a warehouse is the last option, which is the cheapest but in the long run, may not prove to be profitable. All you need to do is ensure proper thermal insulation in the walls. Insulation can be made from polyurethane foam sandwich panels. 

Choose the Right Option 

With all these options available, each of which has its signature pros and cons, it is enough to conclude that without the consultation of an expert it may be difficult for you to choose the right cold storage room manufacturers and the right refrigeration system.